JNCT LASER can be used to clean a workpiece by shining focused laser energy on it. This causes oil spots, rust spots, and dust on the surface of the workpiece to turn into quickly expanding plasma (a high-ionized dangerous gas). The coating, oxide layer, or film layer is either vaporized or peeled off for surface attachment cleaning methods to work.
Mechanical cleaning, chemical cleaning, and ultrasonic cleaning are the most common ways to clean in the industry. Still, their use is limited by rules for protecting the environment and the needs of the high-precision market. The laser cleaning machine seems to be better than traditional cleaning methods in various fields. These are the main places where these products are being sold:
If you don’t touch it, it won’t hurt the mold, so you can be sure it’s right. It can also get rid of microscopic bits of dirt that can’t be cleaned away with traditional methods. This means that the laser can clean without causing any pollution and do an excellent job.
In the business of precision equipment, it is common to clean the parts with chemicals that leave behind residues of the esters and mineral oils that were used to lubricate and protect against corrosion. When esters and mineral oil are broken down with a laser, there is no damage to the surface. To get rid of dirt, the laser vaporizes a thin layer of oxide on the surface of a part. This makes a shock wave, which is used to clean the piece.
Transport by rail
At the moment, steel rails are cleaned before they are welded with grinding wheels and abrasive belts. Residual stress is very high, and many grinding wheels are used up every year. You can find laser rust removal machine for sale in online platforms. This is expensive and causes a lot of dust to get into the environment. As a method for laying high-speed railway tracks, laser cleaning can help my country deal with the problems listed above, eliminate welding flaws like seamless rail holes or gray patches, and improve the safety and stability of my country’s high-speed railway.
The business of flying
The plane’s surface needs to be repainted after a specific time, but the old paint must be removed entirely before the new color can be put on. The most common way to get paint off an airplane is to soak it in chemicals or wipe it down. This process makes a lot of chemical waste and doesn’t work well to get paint off the outside of a car. This is a complex and dangerous thing to do. Laser cleaning of aircraft skins can remove surface paint in a good way and is easy to automate. This technology is now being used to take care of some high-end models.
By shining laser light on a piece of work, you can remove oil splatters and rust spots. This makes a layer of plasma form quickly on the surface of the workpiece (a high-ionized dangerous gas). The coating, oxide layer, or film layer must be vaporized or peeled off to get surface attachment cleaning methods off the surface.
Mechanical, chemical, and ultrasonic machining is the most common way to clean things in the industry. However, environmental protection laws and the needs of the high-precision market make it hard to use these methods in manufacturing. Compared to other ways of cleaning, the laser cleaning machine has a clear advantage in many industries. The main places where these products are sold are:
If you don’t touch the mold, it won’t get broken, so you can be sure it’s right. Standard cleaning methods can’t get rid of microscopic dirt because it’s too small, but this machine can. So, the laser can clean thoroughly without causing any pollution, and it can do this quickly.